MACHINING FOR 25-2496 & 25-2512
MACHINING FOR 25-2497 & 25-2513
OVERLAY NOTCH FOR 25-2525 CUT AT 26.9MM X 26.9MM
NOTCH FOR 25-2550 CUT AT 26.9MM X 50.8MM
OVERLAY NOTCH FOR 25-5050 CUT AT 50.8MM X 50.8MM
1530-LITE X6" 45 DEGREE SUPPORT
1530-LITE X12" 45 DEGREE SUPPORT
DRILL .257 DIAMETER HOLE-ONE WALL
.257 DRILL THRU & .406 SPOT FACE
MILL .257 SLOT THRU ONE WALL
CONNECTOR 3/4INCH STRAIN RELIEF .250-.375
REPLACEMENT COIL FOR 8342G20/22 AC
100HP,1750RPM,3PH,N/AHZ,2578,DPG-FV,
50HP,1140RPM,3PH,N/AHZ,2570,DPG-FV,
60HP,1150RPM,3PH,N/AHZ,2578,DPG-FV,
75HP,1740RPM,3PH,N/AHZ,2570,DPG-FV,
50HP, 1750RPM,3PH,60HZ,2570,TEBC,FOOT
60HP, 1750RPM,3PH,60HZ,2578,TEBC,FOOT